FINEALGA® ME

Broad-spectrum biocide for controlling algae and bacteria in open cooling circuits

Mode of action:

FINEALGA ME is used to control algae and bacteria in open cooling systems. It is highly effective against a wide range of microorganisms and is particularly suitable for combating microbial contamination and the spread of potentially pathogenic microorganisms such as Legionella.

Environmental sustainability:

In concentrated form, FINEALGA ME is classified as corrosive. There is no danger at the recommended application concentration.

FINEALGA ME is a fish poison and must not be allowed to enter groundwater, rivers and lakes.

Further information can be found in the EU safety data sheet.

Application/ Dosage:

FINEALGA ME can be dosed intermittently.
The dosing interval depends on the biological load.

Dosing should take place at a point with strong turbulence.
After adding FINEALGA ME, the drainage of the cooling tower should be closed for some time if possible.

Delivery terms:

The product is supplied in liquid form in 30 or 60 kg containers.

The product must be stored in closed containers in a cool, frost-free place away from heat and direct sunlight.

Advantages

Contact form

Mandatory fields are marked with an *.

Thank you for visiting our pages. If you have any questions about our products or our company, you can contact us by e-mail, phone or mail.

Phone

E-mail